Mathematical Modeling of the Gas Dynamic Parameters of Impinging Heat-Transfer Medium Jet in Borehole Thermal Reaming Process

TitleMathematical Modeling of the Gas Dynamic Parameters of Impinging Heat-Transfer Medium Jet in Borehole Thermal Reaming Process
Publication TypeJournal Article
Year of Publication2019
AuthorsBulat, АF, Voloshyn, OI, Potapchuk, IYu., Yemelianenko, VI, Zhovtonoha, MM, Zhevzhyk, OV, Manigandan, S
Short TitleNauka innov.
SectionScientific Basis of Innovation Activity
Introduction. As compared with other ways of thermal destruction of rocks, the rock destruction by low temperature plasma jet has advantage in terms of distribution of cracks in rock at a considerable depth, high heat transfer coefficient and high specific heat flux, simplified system of automation and remote control, and compactness of thermal tool.
Problem Statement. Thus, the possibilities of analytical determination of optimal parameters of thermal effect on rocks are limited by solution of thermoelasticity equations and contact problems of strength theory. Such formulation of the problem is unacceptable due to complication of taking into account substantial changes in the physical and thermos-physical rock properties while heating and applying mechanical load. Due to abovementioned facts it is obviously necessary to develop a mathematical model that enables to define basic gas dynamic jet parameters of heat-transfer medium in the process of borehole thermal reaming.
Purpose. The purpose of this research is to develop a mathematical model for calculating the gas dynamic characteristics (pressure, density, and velocity) of the heat-transfer medium while it is moving along the surface of the borehole in the thermal reaming process.
Materials and Methods. Mathematical modeling of the flow process for free and impact jets of heat-transfer medium using a PC.
Results. Experimental studies have confirmed adequacy of the developed mathematical model for calculation of gas dynamic characteristics (pressure, density, and velocity) of the heat-transfer while it is moving along the surface of the borehole in the process of its thermal reaming.
Conclusions. The obtained results can be used for modeling the gas dynamic characteristics in the case of applying a thermal tool with electric discharge in other technologies of heat treatment and destruction of materials.
Keywordsborehole, heat-transfer jet, mathematical model, thermal reaming
1. Bazargan, M., Gudmundsson, A., Meredith, P., Browning, J. & Inskip, N. (2015, June). Wellbore instability during plasma torch drilling in geothermal reservoirs. 49th US Rock Mechanics / Geomechanics Symposium, San Francisco.
2. Brkic, D., Kant, M., Meier, T., Schuler, M. & von Rohr, R. (2015, April). Influence of Process Parameters on Thermal Rock Fracturing under Ambient Conditions. World Geothermal Congress, Melbourne.
3. Meier, T., May, D., von Rohr, P. (2016). Numerical investigation of thermal spallation drilling using an uncoupled quasi-static thermoelastic finite element formulation. Journal of Thermal Stresses, 39(9), 1138-1151.
4. Walsh, S., Lomov, I. (2013). Micromechanical modeling of thermal spallation in granitic rock. International Journal of Heat and Mass Transfer, 65, 366-373.
5. Potter, R., Potter, J., Wideman, T. (2010). Laboratory study and field demonstration of hydrothermal spallation drilling. Geothermal Resources Council Transactions, 34, 249–252.
6. Stacey, R., Sanyal, S., Potter, J., Wideman, T. (2011). Effectiveness of selective borehole enlargement to improve flow performance of geothermal wells. Geothermal Resources Council Transactions, 35, 239–245.
7. Wideman, T., Sazdanoff, N., Unzelman-Langsdorf, J., Potter, J. (2011). Hydrothermal spallation for the treatment of hydrothermal and EGS wells: a cost-effective method for substantially increasing reservoir production and flow rates. Geothermal Resources Council Transactions, 35, 283–285.
8. Kleshchov, А. Y., Terentiev, O. M. (2014). Model eksperementalnykh doslidzhen ruinuvannia porody induktyvnoiu plazmoiu. Energetyka. Tekhnologiia, ekonomika, ekologiia, Spets. vyp., 51–54 [in Ukrainian].
9. Terentiev, O. M., Kleshchov, А. Y., Hontar, P. (2015). Planuvannia eksperymentu ruinuvannia krystalichnykh struktur potokamy induktyvnoi plazmy. Visnyk Ternopilskoho natsionalnoho tekhnichnoho universytetu, 1, 134–142 [in Ukrainian]. 
10. Wu, R., Osawa, M., Yokokawa, T., Kawagishi, G., Harada, H. (2010). Degradation mechanisms of an advanced jet engine service-retired TBC component. Journal of Solid Mechanics and Materials Engineering, 4(2), 119-130.
11. Renusch, D., Rudolphi, M., Schütze, M. (2010). Software tools for lifetime assessment of thermal barrier coatings. Part I - Thermal ageing failure and thermal fatigue failure. Journal of Solid Mechanics and Materials Engineering, 4(2), 143-154.
12. Yao, M., He, Y., Zhang, W., Gao, W. (2005). Oxidation resistance of boiler steels with Al2O3-Y2O3 nano- and micro-composite coatings produced by sol-gel process. Materials Transactions, 46(9), 2089-2092.
13. Bulat, А., Voloshyn, O., Zhevzhik, O. (2013). Plasma reactor for thermochemical preparation of coal-air mixture before its burning in the furnaces. Mining of Mineral Deposits, 39-44.
14. Kihara, H., Hatano, M., Nakiyama, N., Abe, K., Nishida, M. (2006). Preliminary studies of spallation particles ejected from an ablator. Transactions of the Japan Society for Aeronautical and Space Sciences, 49(164), 65-70.
15. Abramovich, G. N. (1991). Prikladnaya gazovaya dinamika. Moskva: Nauka.
16. Lukhtura, F. I. (1993). Odnomernaya teoriya sverkhzvukovykh neraschetnykh struy gaza. Izvestiya AN SSSR. Seriya Mekhanika zhidkosti i gaza, 1, 48–56 [in Russian].
17. Mozhayeva, Zh. P. (1978). Research of hydrodynamics and heat exchange at interaction of an axisymmetric turbulent jet with the barrier located under various corners to a stream. PhD (Tech.). Moscow [in Russian].
18. Antsupov, A. V. (1974). Issledovaniya parametrov neraschetnoy sverkhzvukovoy strui gaza. Zhurnal tekhnicheskoy fiziki, 44(2), 372–379 [in Russian].
19. Abramovich, G. N., Girshovich, T. A., Krasheninnikov, S. Yu. (1984). Teoriya turbulentnykh struy. Moskva: Mashinostroyeniye.
20. Savin, V. K., Mozhayeva, Zh. P. Aralov, A. D. (1975). Gidrodinamicheskiye issledovaniya pogranichnogo sloya pri struynom obtekanii plastiny. Izvestiya vysshykh uchebnykh zavedeniy. Seriya Mashinostroyeniye, 9, 76–80 [in Russian].
21. Yudayev, B. N., Mikhaylov, M. S., Savin, V. K. (1977). Teploobmen pri vzaimodeystvii struy s pregradami. Moskva: Mashinostroyeniye.